New member intro
Thread Starter
|
New User
Joined: Aug 2006
Posts: 3
Likes: 0
New member intro
Just wanted to say hello and thanks for all I've learned so far.
I own a 1997 Mercury Mountaineer and I came accross this forum while searching for help on replacing the O2 sensors. I read a recommendation to pull out the console and unplug the sensors through an access panel on top of the transmission hump. This worked great!
Thanks for the help.
I own a 1997 Mercury Mountaineer and I came accross this forum while searching for help on replacing the O2 sensors. I read a recommendation to pull out the console and unplug the sensors through an access panel on top of the transmission hump. This worked great!
Thanks for the help.
Post Fiend
Joined: Mar 2003
Posts: 14,413
Likes: 3
From: Sarnia, Ontario, CANADA!
Hi and welcome to FTE! We are glad you found the information valuable. Enjoy the site. 
Read this for some info that will help you around the site: https://www.ford-trucks.com/forums/s...92&postcount=2
-Matt
Read this for some info that will help you around the site: https://www.ford-trucks.com/forums/s...92&postcount=2
-Matt
Thread
Thread Starter
Forum
Replies
Last Post
