Resetting Engine Codes

Reply Subscribe

Thread Tools

Search this Thread

Jul 22, 2006 | 03:41 PM

YankeeFan

Thread Starter

Junior User

Joined: Mar 2004

Posts: 52

Likes: 0

Resetting Engine Codes

Maybe I am not putting the right words into the search but I can't find any info on how to reset the engine codes, specifically the check engine light, on my 97 X without having to go get a scanner. I seem to remember there was a way to do it but can't seem to find it now.

Jul 22, 2006 | 04:27 PM

don96exp

Senior User

Joined: Nov 2003

Posts: 163

Likes: 0

From: Bucks County, PA

I don't believe you can reset the engine codes without using a scan tool. I'm not sure if disconnecting the battery for a couple of minutes will work, but this may be worth a try.

Jul 22, 2006 | 07:31 PM

bulldog3531

Senior User

Joined: Nov 2004

Posts: 279

Likes: 0

From: Jacksonville, NC

Yes disconnecting the battery will work. Leave it disconnected for at least 5 minutes.

Jul 24, 2006 | 02:13 AM

AlfredB1979

Posting Guru

Joined: Jul 2003

Posts: 1,978

Likes: 1

From: Alvin, Texas.

Check codes, fix problem if not done already....

Then pull ECU fuse in underhood box for a moment, then replace,

Presto.

Jul 30, 2006 | 11:23 PM

MazdaRangerGuy

Elder User

Joined: Jul 2005

Posts: 520

Likes: 0

Another thing you can do is just drive it. Eventually, the computer will recognize the fact that it has been repair and will clear the light all by itself. That way you'll KNOW it's fixed. Might take a couple hundred miles of driving though.

Reply Subscribe