Cruice control

Reply Subscribe

Thread Tools

Search this Thread

Jul 19, 2006 | 06:30 AM

Bergracer

Thread Starter

New User

Joined: Jul 2006

Posts: 6

Likes: 0

Cruice control

Hi all
I have just bought a Explorer 91 4.o aut. etc.
I need som informations on the Cruice Control, -what does the different buttons do,there i 2 on the left side and 3 on the right side of the steering wheel.

Thanks in advance.

Mikael A
Copenhagen Denmark.

Jul 19, 2006 | 06:35 AM

Bergracer

Thread Starter

New User

Joined: Jul 2006

Posts: 6

Likes: 0

......................

Last edited by Bergracer; Jul 19, 2006 at 06:45 AM.

Jul 19, 2006 | 07:54 AM

FTE Trigger

Postmaster

Joined: Aug 2004

Posts: 3,392

Likes: 0

From: Greenvile, SC

1.On 2.Off 1.Resume 2.Set/Accel 3. Coast

I think that is the Correct Order.

Jul 19, 2006 | 08:18 AM

Bergracer

Thread Starter

New User

Joined: Jul 2006

Posts: 6

Likes: 0

Thanks for the reply.
But what does the Coast buton do. ?

Mikael

Jul 19, 2006 | 08:28 AM

FTE Trigger

Postmaster

Joined: Aug 2004

Posts: 3,392

Likes: 0

From: Greenvile, SC

Here's all 3....

Resume......
If you recently disengaged the cruise control by hitting the brake or clutch pedal, hitting the resume button will command the truck to accelerate back to the most recent speed setting.

Set /Accel
Holding down the set/accel button will make the truck accelerate. Tapping it once will make the truck go 1 mph faster

Coast...
Holding down the coast button will cause the truck to decelerate, just as if you took your foot completely off the gas. On most trucks, tapping the coast button once will cause the truck to slow down by 1 mph.