7.3L Exhaust Brake Using Warm Up Valve
#1
7.3L Exhaust Brake Using Warm Up Valve
Does any one know the truth regarding using the Warm Up Valve as an Exhaust brake? I purchased a wiring harness that utilizes this valve and also locks the Torque Converter when activated. I have read things that say this method can harm the engine. The Jake brake people say this method can possible cause the lifters to float and allow the exhaust valve to hang open possibly causing the piston to smack it. I tow a 15K 5<SUP>th</SUP> wheel just about every weekend threw some reel steep mountains so any help with braking would go a long way.
Thread
Thread Starter
Forum
Replies
Last Post
dbradicich
1999 - 2003 7.3L Power Stroke Diesel
32
04-29-2014 07:21 AM
38-72
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
17
11-03-2011 07:10 PM
Lugnut2008
Modular V8 (4.6L, 5.4L)
5
11-09-2007 01:57 PM