SD clutch suggestions needed...
Thread Starter
|
Senior User
Joined: Nov 1999
Posts: 149
Likes: 2
From: SW Illinois... near St. L
SD clutch suggestions needed...
My '01 5.4 F250 SD/CC is getting towards a new clutch requirement. (Yeah... I played around a bit too much!) I'm curious if any of the other 5sp owners have had any luck with aftermarket clutches. Let me know what you have that WORKS good for pulling on a semi-regular basis!
I have another question about these maunal boxes... my clutch pedal doesn't always return to the full upright position. I've looked at the bushing, linkage areas, and everywhere else I can get an inspection mirror into. Any suggestions on where/what to look for? There's no hydraulics on the ground and the reservoir is full, so that is somewhat eliminated.
Thanks in Advance!
Dave
I have another question about these maunal boxes... my clutch pedal doesn't always return to the full upright position. I've looked at the bushing, linkage areas, and everywhere else I can get an inspection mirror into. Any suggestions on where/what to look for? There's no hydraulics on the ground and the reservoir is full, so that is somewhat eliminated.
Thanks in Advance!
Dave
