Cool Down EGT's
Thread Starter
|
Senior User
Joined: May 2006
Posts: 181
Likes: 0
Cool Down EGT's
What is the general consensus of the proper cool down EGT on a 2004 6.0 PSD before engine shut off? I've heard 300, my Edge programmer default is 400.
Thoughts would be greatly appreciated.
JC
Thoughts would be greatly appreciated.
JC
Senior User
Joined: Aug 2003
Posts: 438
Likes: 0
From: Colorado Springs
I let mine drop to below 400 - 300 would take too long. Not sure if my logic is right, but the flash point of the Delo 400 I use is right around 460 degrees, so I'm presuming it will remain stable below that.
Mark
Mark
