will it work
will it work
Post Fiend
Joined: Sep 2004
Posts: 5,231
Likes: 1
From: Near Fresno, California
At 5000 RPM you are pumping almost 200 CFM through your carb - so a 465 cfm will be more than enough - if not too much.
Go to Holley.com and they will show you how to estimate your requirments. They recomend almost 400 cfm(assuming 5K RPM) - so 465 is not too big
Go to Holley.com and they will show you how to estimate your requirments. They recomend almost 400 cfm(assuming 5K RPM) - so 465 is not too big
Last edited by WillyB; Jun 11, 2006 at 05:02 PM.
