accelerator quit
Thread Starter
|
New User
Joined: Feb 2006
Posts: 6
Likes: 0
accelerator quit
cannot find problem Fuses and links have been checked.An OBD code shows pass w/no codes to erase.The servie engine light is on.The app sensor and ivs
had these values.
brn/w 5.09 v red/yel 12.03 v
gry/w 5.00 v w/koeo red/lt grn 12 v closed
yel 5.00 v
Gry/w 565 ohms between yel 2874 ohms.Can the pcm be taken to dealership for testing?any ideas would be great.
Thanks Jim
had these values.
brn/w 5.09 v red/yel 12.03 v
gry/w 5.00 v w/koeo red/lt grn 12 v closed
yel 5.00 v
Gry/w 565 ohms between yel 2874 ohms.Can the pcm be taken to dealership for testing?any ideas would be great.
Thanks Jim
Fleet Owner
Joined: Jun 2004
Posts: 25,090
Likes: 1,112
From: Rio Rico, AZ.
Originally Posted by bcloud
The service engine light is on.
I recommend that you get the truck scanned with an enhanced scanner, not a generic one. Probably have to go to the dealer for that one.
Thread
Thread Starter
Forum
Replies
Last Post
