Resto-Mod '78
Thread Starter
|
Laughing Gas
Joined: Jul 2001
Posts: 850
Likes: 14
From: Fayetteville, NC
Resto-Mod '78
Well...my restomod project has begun on my 78 long bed. My first question of many to come I'm sure is if there is a company that makes either a complete wiring harness for these trucks or at least the harness for the rear (tail lights etc.)? The wiring on this truck was rigged together. Also, is there a rebuild kit for tilt steering wheels? My truck came with one and it is loose as all get out. I need to tighten it back up. I'll keep updating photos of my progress for anyone who is interested. This is going to be a ground up resto and my first one. Best part is...I already see the final product!!! Makes for great motivation when you get frustrated 
Posting Legend
Joined: Sep 2001
Posts: 30,255
Likes: 37
Postmaster
Joined: Apr 2000
Posts: 2,838
Likes: 6
From: SD
For the rear wiring, I just bought a roll of trailer wire - has green, yellow, white and brown all fused together. The I just cut out the old wire and soldered in the new. I also replaced the rear light sockets while I had it all apart. Works great.
Marty
Marty
Postmaster
Joined: Apr 2000
Posts: 2,838
Likes: 6
From: SD
You may be able to make them work. The best one is on the repair manual cd rom. Its sold on this site (Motorhaven is the name of the store) for $50. That way you have all the repair manuals and wiring diagrams - very usefull tool.
Marty
Marty
New User
Joined: Jan 2008
Posts: 0
Likes: 24
UEMF,
It is a well known fact that althought Painless is okay fromn some, it is considered very painful for others not only for the product but from what I have read the service.
May I suggest ...suggesting www.centechwire.com like I do instead ?
1ole4, Try www.centechwire.com for your harness
There is a thread on here that covers both companies and centech blows painless awy on both counts.
The parts for tilts are long gone.
You can however use the parts from a van tilt (except the steering shaft)to rebuild yours.
I have some extra parts here if you can't find one at a wrecker.
E-mail though don't talk about it here.
It is a well known fact that althought Painless is okay fromn some, it is considered very painful for others not only for the product but from what I have read the service.
May I suggest ...suggesting www.centechwire.com like I do instead ?
1ole4, Try www.centechwire.com for your harness
There is a thread on here that covers both companies and centech blows painless awy on both counts.
The parts for tilts are long gone.
You can however use the parts from a van tilt (except the steering shaft)to rebuild yours.
I have some extra parts here if you can't find one at a wrecker.
E-mail though don't talk about it here.
