Power Windows
Thread Starter
|
New User
Joined: Mar 2006
Posts: 2
Likes: 0
Power Windows
I'm looking to put a set of Power Window regulators into my 1993 Ford F150. I purchased a set of regulator and motors, switches, wiring harnesss and hardware. My question is does anyone have a layout for the holes to be drilled in the door to mount the regulators? They are not the same as what is there now.
Postmaster
Joined: May 2003
Posts: 3,310
Likes: 9
From: E.Lincoln County, NC
You'd be better off making a paper pattern from an actual power door but here's an attempt to spec it for you.
Other photos are at:
http://i11.photobucket.com/albums/a1...gpoints002.jpg
http://i11.photobucket.com/albums/a1...gpoints003.jpg
Other photos are at:
http://i11.photobucket.com/albums/a1...gpoints002.jpg
http://i11.photobucket.com/albums/a1...gpoints003.jpg
Last edited by ncranchero; May 28, 2006 at 09:44 AM.
New User
Joined: May 2006
Posts: 4
Likes: 0
i did the same thing and you only have to drill out a couple smaller holes for the power window actuator, but everything else fits right up, then there is he power door locks i cant get mine to work, cant anyone help with some schemartics for a 96 f150
