No Key.....
Thread Starter
|
Tuned
Joined: Jan 2001
Posts: 432
Likes: 0
From: Lexington
No Key.....
Hey Guys,
I just "acquired" a '72 F-250 Sport Custom w/o a key. How hard will it be to remove the key cylinder and replaced it w/ a new one so I can actually start the truck when the engine is installed w/o hot-wiring it?
Thanks!
Doc
I just "acquired" a '72 F-250 Sport Custom w/o a key. How hard will it be to remove the key cylinder and replaced it w/ a new one so I can actually start the truck when the engine is installed w/o hot-wiring it?
Thanks!
Doc
Senior User
Joined: Jan 2002
Posts: 237
Likes: 0
No Key.....
That key cylinder is pretty easy to replace. Just get a screwdriver and turn the round outer ring out of the dash like a common threaded nut. Just spin it off, drop the ignition switch out of the back of the dash, and unplug the key switch from the wire plug. There you have it, and will need to either have a replacement or go get one.
