clutch trouble
Senior User
Joined: Jul 2005
Posts: 128
Likes: 0
From: Otsego, MN
Welcome Atlman, start with the simple things. It is an eccentric (concentric?) internal slave cylinder clutch system, inside the bellhousing. Check for the resivour fluid level on the firewall by the vacum booster for the main brakes. It will be a single round one. Check for leaks at the bellhousing, there are two line going in where it couple connects to the internal slave unit. Does the pedal feel smooth? Perhaps the hydraulics are down, or physically frozen with the throw-out bearing / slave assembly. It's been a few years to remember when I did all the clutch replacing, but good luck.....
Last edited by DAJF150; May 24, 2006 at 02:18 PM.
