ferrea valve question
Thread Starter
|
Senior User
Joined: Jan 2006
Posts: 128
Likes: 0
From: St. Peter, MN
ferrea valve question
I'm building a new 400 and looking at some replacement valves. The motor I bought had one burnt valve and another starting. I found a guy the has a set of ferrea valves for sale. He says they will work for my application. they are: 2.07" exhaust (ferrea # F5040) and 1.65" intake (ferrea # F5026). If any of you guys know if these will work with my stock 2v heads, let my know. Thanks.
Jason
Jason
Postmaster
Joined: Aug 2001
Posts: 4,270
Likes: 5
From: Delaware
The stock valves are 2.04" Intake and 1.65" Exhaust. Your machine shop should be able to install a 2.07" valve in the intake seat. Check with your shop. Make sure that the stem length is correct, or you will need an adjustable rocker setup.
