find parts?
Thread Starter
|
Freshman User
Joined: Oct 2004
Posts: 47
Likes: 0
From: North Central Indiana
find parts?
anyone know were to find accesories for a 92 7.3L non turbo F250. Seems like every were I look starts at 94. i.e cold air intakes. Ive checked everywhere for all kind of part and can't ever find anything for diesel truck of my kind. Is my type of truck the black sheep of the autoworld.
Post Fiend
Joined: Nov 2003
Posts: 21,285
Likes: 15
From: Nutter Fort, WV
The IDI engine was not a cool truck. So all the yuppies did ot drive them, just working type folk. So the aftermarket hot rod parts were not made for them.
It is almost funny how many places make stuff for the Power Stroke, but the IDI that started the popularity of diesel trucks got left out.
I made my own, a couple of pictures.
https://www.ford-trucks.com/user_gal...100545&width=0
https://www.ford-trucks.com/user_gal...100511&width=0
It is almost funny how many places make stuff for the Power Stroke, but the IDI that started the popularity of diesel trucks got left out.
I made my own, a couple of pictures.
https://www.ford-trucks.com/user_gal...100545&width=0
https://www.ford-trucks.com/user_gal...100511&width=0
Last edited by Dave Sponaugle; May 19, 2006 at 04:38 PM.
Post Fiend
Joined: Nov 2003
Posts: 21,285
Likes: 15
From: Nutter Fort, WV
I have a turbo motor, I noticed a difference even with the turbo.
It also dropped my EGT's about 150 or 200 degrees.
I ran the stock plastic air cleaner duct to the stock ATS air cleaner housing.
Since I am running positive pressure to the air cleaner at 70 MPH. I know it would also help a NA motor while you were at speed. It would not help pulling the hill at 10 MPH much, but once on the road it should help flatten out the hills a bit.
If I were to do it to a NA motor I would use the stock air cleaner housing to do it.
It also dropped my EGT's about 150 or 200 degrees.
I ran the stock plastic air cleaner duct to the stock ATS air cleaner housing.
Since I am running positive pressure to the air cleaner at 70 MPH. I know it would also help a NA motor while you were at speed. It would not help pulling the hill at 10 MPH much, but once on the road it should help flatten out the hills a bit.
If I were to do it to a NA motor I would use the stock air cleaner housing to do it.
