Installing Rebuilt 302
Thread Starter
|
Senior User
Joined: Jan 2003
Posts: 382
Likes: 0
From: Prairieville, Louisiana
Installing Rebuilt 302
I'm ready to install my new rebuilt 302 in my 1987 F150 but I need to know all the sensors and valves I have to replace (ex. egr, pcv). Can anyone give me a complete list off all the little things I need to relpace. I'm great at building motors but I suck when it comes to the electrical part of it.
Posting Guru
Joined: Mar 2006
Posts: 1,118
Likes: 0
From: Williamson, NY
If your sensors/valves were working before the rebuild you really should not need to replace any of them, unless you just like knowing that they are all new at the time of rebuild. The PCV valve is cheap to replace replace, the EGR valves can be quite expensive. You might try to clean out the exhaust deposits from the EGR and just paint it up nice before reinstalling it on your engine. If you need to change these things later it should not really be an issue, since they are all easy to get to w/o having to taking apart the engine to do so. Good luck.
Jim
Jim
