Valve Cover Problems
Thread Starter
|
Freshman User
Joined: Mar 2004
Posts: 28
Likes: 0
Valve Cover Problems
I Finished the mechanicles of the 4.2 i am building to discover that the valve covers are chiping. Most of the paint came off of one valve cover and the other one is starting to do the same thing. What can I do to fix this? I want to get this motor back in the truck so i can have my garage back. I know that the valve covers are made of magnesium. The engine is out of a 97 F-150.
Dan Pennington
69 IH Scout 800A
89 F-350 crewcab dually
90 Ranger 4X4 (322000 miles on orig. mtr)
01 Expedition
92 Bronco
Dan Pennington
69 IH Scout 800A
89 F-350 crewcab dually
90 Ranger 4X4 (322000 miles on orig. mtr)
01 Expedition
92 Bronco
Senior User
Joined: Mar 2005
Posts: 352
Likes: 1
From: uk
hi, i used a heat resistant wrinkle paint to try and cover up the poor paint. first i degreased them then scraped off loose paint. to be truthfull the finnish was not the best but i did not want to damage the covers as i did not know what they were made from. good luck bokker.
