no low beems
Thread Starter
|
Freshman User
Joined: Apr 2005
Posts: 48
Likes: 0
it is a 2000 ranger 3.0. I don't have a owners manual and nothing is marked. If someone has the samething I would like to know what relay to try replaceing if it has one. Sorry for not putting the make and year in. thanks
Post Fiend
Joined: Jul 2005
Posts: 8,462
Likes: 4
From: Durant, OK (SOSU)
Ok...best I can tell, not quite sure looking at this ridiculous diagram, power runs from the main light switch to the multi function switch to the I/P fuse panel on numbers 4 and 8, 4 for the left headlight and 8 for the right. Sorry I can't be of more help.
RP
Zach
RP
Zach
Post Fiend
Joined: Jul 2005
Posts: 8,462
Likes: 4
From: Durant, OK (SOSU)
Ok well there you go, john knows better than I do, my setup is different ('94). If you have a voltmeter you could follow the wires and check them for power, but that can be tricky.
RP
Zach
RP
Zach
Postmaster
Joined: Oct 2003
Posts: 4,516
Likes: 1
From: SoCal
Theres only 2 things that can kill both low beams, a bad LOM/lamps out module or a bad dimmer/multifunction switch like john mentioned
If your truck doesnt have the lamps out warning system, check the multifunction switch with your ohm meter.
If your truck doesnt have the lamps out warning system, check the multifunction switch with your ohm meter.
