AFE Stage 2 06 PSD Check Engine Light
Thread Starter
|
New User
Joined: Feb 2006
Posts: 10
Likes: 0
AFE Stage 2 06 PSD Check Engine Light
I just installed an AFE stage 2 intake kit on my 2006 6.0L PSD. The check engine light came on within 20 miles. Anybody else have this problem. If so what is causing the light and how do you fix it.
Thanks for any help, Nick
Thanks for any help, Nick
Senior User
Joined: Oct 2005
Posts: 125
Likes: 0
I Had The Same Problem With My 06 Talk To Michael Kain In Customer Service And He Will Send You A New Tube That Fixes The Problem I Have Had Mine For Over 1000 Miles And No Cel's So Far It Has To Do With The Positioning Of The Map Sensor I Hope This Helps
Cross-Country
Joined: Dec 2004
Posts: 58
Likes: 0
From: Alberta
Originally Posted by LAWNMOWER MAN
I Had The Same Problem With My 06 Talk To Michael Kain In Customer Service And He Will Send You A New Tube That Fixes The Problem I Have Had Mine For Over 1000 Miles And No Cel's So Far It Has To Do With The Positioning Of The Map Sensor I Hope This Helps
Did you get a new tube already? How long did you have to wait before you got your new tube.
I've been waiting for approx 3months for a new tube to arrive.
Junior User
Joined: Jul 2005
Posts: 51
Likes: 0
i have the same problem, its excessive air flow that the code throws. I called the guy and he told me to disconnect the batterys for a half hour to reset it and i did. The light stayed off for a little while then it was back onl. I then called again and he told me they were in the process of making a new tube, now this was last week, so im guessing they didnt make them yet, unless he was just lying to me.
