Heater control cable placement.
Elder User
Joined: Jun 2002
Posts: 851
Likes: 0
From: Elizabeth City, NC
Heater control cable placement.
When looking at the heater from the seat there is two places to connect cables and two cables coming from the heater controls. My question is which one goes where. There is a short and a long cable. My truck had no heater controls nor a dash for that matter when I bought it and I didn't unhook the heater controls I have from the donor truck myself. Any help is greatly appreciated. I am real close to having the donor dash totally installed and will post pics upon completion.
Russell
1968 F250 LWB 300-6
FORD=First on Race Day
#88 Dale Jarrett
#21 Elliott Sadler
#97 Kurt Busch
#28 Ricky Rudd
Russell
1968 F250 LWB 300-6
FORD=First on Race Day
#88 Dale Jarrett
#21 Elliott Sadler
#97 Kurt Busch
#28 Ricky Rudd
Post Fiend
Joined: Feb 2000
Posts: 5,130
Likes: 8
From: Brea CA
Heater control cable placement.
Just went out to the parking lot to get my shirt dirty. 
The heater control panel has two sliders. The top slider controls one long cable that goes to the engine compartment to the hot water valve. The bottom slider controls two shorter cables that go to the heater box, the cable on the driver's side of the control goes to the defroster door, the cable on the passenger side of the control goes to the heater door.
Barry
The heater control panel has two sliders. The top slider controls one long cable that goes to the engine compartment to the hot water valve. The bottom slider controls two shorter cables that go to the heater box, the cable on the driver's side of the control goes to the defroster door, the cable on the passenger side of the control goes to the heater door.Barry
