key switch?
Freshman User
Joined: Sep 2002
Posts: 38
Likes: 0
From: usa
key switch?
i have a electic draw problem.can anyone tell me the postions on my key switch?acc.,start,run ? should the switch be left in the straight up position for park? what is the difference between a 352 and a 360?what parts can be swapped? my vin says 360 but block says 352 why?thanks fopr any help
Senior User
Joined: Oct 2001
Posts: 479
Likes: 0
From: Miami U.S.A.
key switch?
Unless you have cross referenced the casting code for your motor then you probably do have a 360. Almost every FE powered engine has a 352 cast into the front of the block. The casting code is located below the oil filter get that and we can tell you what you have. The only other # i know of on the front of the block is a mirror image 105.
The positions on my switch if I remeber are straight up = off. left = acc. right = run. farther right = start. I could be wrong but i pretty sure that is how it goes.
Hope this helps you
Scotty
The positions on my switch if I remeber are straight up = off. left = acc. right = run. farther right = start. I could be wrong but i pretty sure that is how it goes.
Hope this helps you
Scotty
