Ignition switch issue
Thread Starter
|
FTE Chapter Leader
Joined: May 2002
Posts: 42,613
Likes: 3,131
From: Fraziers Bottom, WV
Ignition switch issue
I bought my 2002 Escape in January with 89,000 miles and I received one of the OEM key. The dealer programmed a second key and both work. The other day the OEM key would go in the ignition but would not turn. After checking the shifter and shaking the steering wheel the key still would not turn. I released the tilt latch and moved the column up about ¼ inch and the key turned and the vehicle started! The column had been down for about a week!
Anyone have this problem?
Anyone have this problem?
Senior User
Joined: Dec 2003
Posts: 464
Likes: 0
From: Texas
I've had similar problems on higher mileage vehicles where the key would wear over time and sometimes require a jiggle of the steering wheel.
From somewhere else on the web...I recall a very limited number of people having issues with ignition. The two causes I recall:
1) They had another vehicle's PATS key on their keychain.
2) A very limited number of almost new vehicles had bad ignition cylinders.
From somewhere else on the web...I recall a very limited number of people having issues with ignition. The two causes I recall:
1) They had another vehicle's PATS key on their keychain.
2) A very limited number of almost new vehicles had bad ignition cylinders.
Thread
Thread Starter
Forum
Replies
Last Post
justplumducky
1987 - 1996 F150 & Larger F-Series Trucks
9
Aug 28, 2010 08:24 PM
