New Initial Timing
Thread Starter
|
Laughing Gas
Joined: Jul 2002
Posts: 843
Likes: 1
From: USA
New Initial Timing
After I advance the cam 4 degrees to obtain a "straight up" valve timing, do I need to change the dizzy initial timing to make up for the change? If I do, then how much and in which direction?
Posting Legend
Joined: Sep 2001
Posts: 30,255
Likes: 37
The cam timing has nothing to do with ignition timing other than the drive mechanisms are a physically connected inside the engine. Set the timing normally with a timing light off the crankshaft balancer marks.
