EFI exhaust
Thread Starter
|
New User
Joined: Mar 2006
Posts: 16
Likes: 0
EFI exhaust
Ive got an 85 f250. From what I have read here, the efi exhaust is a good sub for a header. Does the manifold have any holes in it? I am putting in an offy intake, and need it to do something since I cannot use the orig. manifold. Can I just bolt it on and go?? I am not interested in sound, I just want it to work for less money than a header.
Last edited by sharpcutter; Mar 22, 2006 at 06:00 PM.
Freshman User
Joined: Mar 2005
Posts: 38
Likes: 0
From: TN(Nashville/Chattanooga)
Pretty much. I just did this on my truck two weeks ago, but i retained the stock intake. it's really not that hard of a job either. I did have to cut one of the mounting flanges for clearance, and not every single hole on the EFI manifolds will have associated bolt holes on the carbureted head. But yeah, it's a basic bolt-on.
I'm actually about 95% finished with an article that I plan to submit to FTE for publication, so you might see it pop up in the articles section sometime soon (if they accept it)
I'm actually about 95% finished with an article that I plan to submit to FTE for publication, so you might see it pop up in the articles section sometime soon (if they accept it)
