stud welder attachment
Thread Starter
|
Senior User
Joined: Mar 2006
Posts: 110
Likes: 0
From: B.C. Canada
stud welder attachment
Hello- I'm new here so I hope in the right forum. I remember an article in a magazine (can't find it now) about an attachment for a MIG welder. It held a stud, ready to weld, to attach it to a body panel to pull out a dent. I think it came with a slide hammer with some kind of cogged wheel to grab on to the stud quickly and release quickly. Been looking for a while on the web but haven't come up with anything. Anybody here know who makes it or sells it?
Junior User
Joined: Mar 2004
Posts: 71
Likes: 2
here's one on Ebay right now. item number 4447070588
hers's one at Harbor Freight
hope that's what your looking for.
hers's one at Harbor Freight
hope that's what your looking for.
Thread Starter
|
Senior User
Joined: Mar 2006
Posts: 110
Likes: 0
From: B.C. Canada
Thanks for the reply. Actually, what I'm looking for is a tip for a regular mig welder that screws on to the end of the welder and works as a stud welder.
The one on Ebay looks like as good a deal that I'll ever find, but I see he only sells to the US. We don't have a Harbour Frieght here.
The one on Ebay looks like as good a deal that I'll ever find, but I see he only sells to the US. We don't have a Harbour Frieght here.
Senior User
Joined: Jul 2001
Posts: 432
Likes: 1
From: West London, England
I have had good results tack welding large (unplated) washers around the dent and using a slide hammer with a hook on it to gently ease the dent out
Start from the outside and work around toward the middle
Steve
Start from the outside and work around toward the middle
Steve
