Tools for autospring.
Thread Starter
|
Senior User
Joined: Aug 2004
Posts: 105
Likes: 0
Tools for autospring.
Hey all, have my 2.5"autospring on the way and I was just wondering what are the tools I need. I dont mean normal hand tools or air ratchets, but more like the 30mm wrench(i think) and how big of a LB/FT torque wrench do i need up too.
Thanks in advance
Kevin
Thanks in advance
Kevin
New User
Joined: Feb 2006
Posts: 2
Likes: 0
Just installed my 2.5'' today, you will need 10,15,18,17,21,30 mm deep sockets. you will also need small adjustable for holding stem on sway bar bolt, stem turns.Also will need 15,17 mm wrenches and a hammer.10 mm is for taking off the bracket that holds the brake lines to the frame, directions don't mention this but I highly recommend it.Takes strain off brake lines when A frame drops. pretty easy install. Good Luck.
