Clutch Question slipping??
Thread Starter
|
New User
Joined: Jan 2004
Posts: 24
Likes: 0
Clutch Question slipping??
I havent owned this truck long and I am still learning a lot for everone out there. It is a 94 turbo 7.3 with 5 speed. My question is driving down the road in 4th and 5th after 40 or so miles when i accelerate heavily the rpms jump like the clutch is slipping. Every now and then when I take it out of gear the shifter shutters. But they other day I could not make it happen. It goes into reverse and 1st just fine all the time so far. Is the sights of failure or am I imagining things. I just wanted to ad that I love the info in here it is very helpful. Love this old truck 
just want to keep her running strong. Thanks
just want to keep her running strong. Thanks
Post Fiend
Joined: Nov 2004
Posts: 5,638
Likes: 1
From: Manitoba
The clutch plate could be worn and slipping........
Visit the ZF web page...for trouble shooting tips.
http://www.zf-group.com/am/pc/lt/ampclt02.phtml
Visit the ZF web page...for trouble shooting tips.
http://www.zf-group.com/am/pc/lt/ampclt02.phtml
i ain't rite
Joined: Mar 2005
Posts: 65,623
Likes: 5,633
From: Marlboro Mental Hospital.
i am not sure if the 94 still used the dual mass flywheel, but that is a classic sign of a bad flywheel. everything is fine for a while, then it seems like the clutch is slipping in fifth gear. stop the truck, and do a burnout in first .get back to fifth, and it slips again. stop, let it cool off overnight and it is good till you get about 1 hours driving in then slips again
Junior User
Joined: Feb 2004
Posts: 52
Likes: 0
From: ky
my 88, 250 did that a while back, it had clutch changed 5000 miles back. drove me crazy for a few days. check the trans to engine bolts. mine were loose. they are a pain to get to the top ones, need rubber arm.lol
