Outside Glass Trim
Thread Starter
|
Senior User
Joined: Nov 2004
Posts: 279
Likes: 0
From: Jacksonville, NC
Outside Glass Trim
On my 98 Sport the driver side rear black trim/molding is starting to seperate and is leaking water inside now. How hard is it to replace or can it be resealed? or should this be left to a body shop?
Logistics Pro
Joined: Jan 2001
Posts: 4,123
Likes: 2
From: Fort Smith
I'm not sure on the Sports, but I know on the 4drs, the rear glass nad trim are a bolt on item. You have to remove the trim inside to get to the bolts, then it can be removed. Might be worth just stopping by a local dealership and asking someone in the service center how that comes apart. You might be able to find a local glass company also that would have a good fix to it without having to buy the entire trim.
Thread Starter
|
Senior User
Joined: Nov 2004
Posts: 279
Likes: 0
From: Jacksonville, NC
Thanks for the reply. I will proberly just end up going to the dealership whenever I get time to make it there. I might pull the trim out this weekend and see if the bolts are loose and tighten them if needed to see if that helps. Thanks again.
Bulldog
Bulldog
