MAF conversion
Thread Starter
|
Laughing Gas
Joined: Jul 2001
Posts: 850
Likes: 14
From: Fayetteville, NC
MAF conversion
Ok...this is what I have. 1994 F-150 4x4. 351 with the EOD transmission. Headers, upgraded ignition, etc. I have been searching high and low for a company that makes a Mass Air Flow conversion for this truck. Apparently the ones they make aren't for the 351 with the EOD. A guy at Ford Racing said they don't make a conversion kit for that set up. 
I was kind of hoping someone here might know of a company that manufactures one 
ANY help would be greatly appreciated.
I was kind of hoping someone here might know of a company that manufactures one ANY help would be greatly appreciated.
Lead Driver
Joined: Nov 2002
Posts: 9,557
Likes: 44
From: Concord, NC
You'll have to get a setup that will allow the engine to be controlled by the mass air computer, and at the same time let the transmission be controlled by the computer that is in your truck now. fordfuelinjection.com could likely make a harness for it. If you are pretty good with electronics, you might even be able to do it yourself, but since you are looking for a kit, I don't really think that making your own would be a good option. I don't know how it has to be wired to make both computers function.
