My second question.

Reply Subscribe

Thread Tools

Search this Thread

Feb 1, 2006 | 10:13 PM

tdwhiteIII

Thread Starter

Junior User

Joined: Feb 2006

Posts: 51

Likes: 0

My second question.

<HR style="COLOR: #666666" SIZE=1> 

1986 FORD BRONCO4x4 5.8ltr 351ci automatic trans carburated
I installed A MSD OFF-ROAD ignition box A couple of years ago and it has recently failed I deleted the old wires from the system I cannopt for the life of me remember what two wires need to go to the coil and what two wires need to go to the module or where the originated or color for thatmatter
thanks much tom

Feb 2, 2006 | 01:19 PM

Kemicalburns

Hotshot

Joined: Jul 2002

Posts: 14,285

Likes: 12

From: Bend,OR

might try a haynes manual

Feb 2, 2006 | 01:21 PM

tdwhiteIII

Thread Starter

Junior User

Joined: Feb 2006

Posts: 51

Likes: 0

haynes manual

I have a chiltons and it is to vauge I am unable to trace wire or colors.

Feb 2, 2006 | 02:52 PM

poffutt

Elder User

Joined: Jan 2005

Posts: 656

Likes: 1

From: Houston

Just stay tunned... someone with an 86 will help you out.

Feb 2, 2006 | 11:04 PM

greystreak92

Lead Driver

Joined: Sep 2002

Posts: 9,182

Likes: 12

From: Gateway to the West

According to the information I have at my disposal, the coil has a RED/LT.GREEN wire originating ultimately from pin #11 of the ignition switch. the other is a DRK.GREEN/YELLOW originating at the Duraspark module.

There is also a PINK/LT.BLUE and an ORANGE/YELLOW running fromt he Duraspark module to the dizzy.

Feb 2, 2006 | 11:25 PM

tdwhiteIII

Thread Starter

Junior User

Joined: Feb 2006

Posts: 51

Likes: 0

thank you for your reply

But what's a dizzy? I will see if i can figure the first part out.
Also what about the spark suppresor or small round cylinder with one wire near the coil? thanks tom