PCM problem
Thread Starter
|
New User
Joined: Jan 2006
Posts: 1
Likes: 0
PCM problem
hello all i been having a problem with my 1996 ford truck i have finally figure it to be the pcm going thru the books and a ford dealer they are telling me the pcm is under the hood but can find no pcm there or anything looking like it i check under the dash but find 3 boxes there one behind the glover compartment that has like 9 wires and is black and 2 others that i remove and was told that is the air bag senor and the automatic door locksis geting to the point of pulling my hair out. my problem was it was very hard to start i change the fuel filter gave it a complete tune upchange the coil and icm and it still giving me the same problem it is a 1996 ford king cab with a 5.0
Post Fiend
Joined: Mar 2003
Posts: 14,413
Likes: 3
From: Sarnia, Ontario, CANADA!
We are happy to have you! There is a ton of great info on this site. But, before you go snooping around there are a few things you need to do first.
1) Want to meet or talk to other members in your area? There are Provincial, State and International Chapters located near the bottom of the main forum page.
2) Before you post a thread asking a question be especially aware of where (what forum) to place it in. FTE is HUGE! Make sure you read the Read First: at the top of the forum before you go posting.
3) And finally you should review the Guidelines. They will kind of give you an idea of what is and isn't allowed on this site ("The Rules").
And that is it. I hope you enjoy the FTE "Experience"! This is a great place and we have lots of fun while exchanging valuable info. If you have any questions or problems do NOT hesitate to contact me. Just click my username then send me an email.
-Matt
Thread
Thread Starter
Forum
Replies
Last Post
