Canadian Guy
Thread Starter
|
New User
Joined: Mar 2005
Posts: 2
Likes: 0
Canadian Guy
I am modifying a 1 ton mercury pickup. This is a 46, or 47. I am not sure as numbers do not show up as correct. The engine number is J66354 and Serial Number is 412114778399. I also have 2 1948 Ford pickups. I am changing the fenders to 1/2 ton and going to put a 48 1/2 ton bed. I have a 1970 429 ans a C6 that is going in it. I might be selling parts later but for now has anyone installed a 429 in their older ford or merc?
Post Fiend
Joined: Mar 2003
Posts: 14,413
Likes: 3
From: Sarnia, Ontario, CANADA!
Originally Posted by Mil1ion
Welcome to the site fellow Canadian 
We are happy to have you! There is a ton of great info on this site. But, before you go snooping around there are a few things you need to do first.
1) Want to meet or talk to other members in your area? There are Provincial, State and International Chapters located near the bottom of the main forum page.
2) Before you post a thread asking a question be especially aware of where (what forum) to place it in. FTE is HUGE! Make sure you read the Read First: at the top of the forum before you go posting.
3) And finally you should review the Guidelines. They will kind of give you an idea of what is and isn't allowed on this site ("The Rules").
And that is it. I hope you enjoy the FTE "Experience"! This is a great place and we have lots of fun while exchanging valuable info. If you have any questions or problems do NOT hesitate to contact me. Just click my username then send me an email.
-Matt
Thread Starter
|
New User
Joined: Mar 2005
Posts: 2
Likes: 0
Starter Problems
I put a stroked 351w from a 88 ford bronco and a C4 from a 80 Ford car. I used the correct 157 tooth flywheel for the C4 with with a 50 oz weight. I used the 80 starter and tried the 88 starter and same problem. When I start the engine the starter keeps turning and self destructs. I even dought a new starter and same thing. I put in new cables, solenoid, and even tried a spacer between the starter and where it bolts on same thing. Starter sounds great but wont disengage.
Thread
Thread Starter
Forum
Replies
Last Post
