Help!!!! 91 bronco....
Thread Starter
|
New User
Joined: Jan 2006
Posts: 8
Likes: 0
Help!!!! 91 bronco....
hey guys
my name it tony...
im a new bronco owner.. I just bought a 91 silver edition/351W..Great condition.. OK. I was testing out the 4x4 and now the 4x4 does not want to disengage.. i put the tranny in Neutral and press the 4x4 button but all it does is blink but it does not turn off the light stays lite... When i press the button i hear a click coming from the computer... I dont know what it might be as i said i am a new owner of a bronco... can it be the switch, the computer, the transfer case? any input is appreciated.. thank you in advance...my email is t67stang@hotmail.com
Posting Guru
Joined: Jun 2003
Posts: 1,777
Likes: 1
From: Perry,Ga.
Big F350
I think this needs to be in the big Bronco forum.The BII was not made in 91 nor did it ever come with a 351.
But the problem sounds like the elec. motor on the T-case is not working.You can remove it and clean it,thats where I would start.The BII has the same problem with the elec. motors.Good luck and welcome to FTE.
I think this needs to be in the big Bronco forum.The BII was not made in 91 nor did it ever come with a 351.
But the problem sounds like the elec. motor on the T-case is not working.You can remove it and clean it,thats where I would start.The BII has the same problem with the elec. motors.Good luck and welcome to FTE.
