6.9 turbo
Fleet Owner
Joined: Jun 2004
Posts: 25,090
Likes: 1,112
From: Rio Rico, AZ.
Welcome to FTE mydieselpower86
I don't know the answer to your question, but if you click on the search button at the top of this page you'll be able to input some keywords. You'll most likely get your answer.
I don't know the answer to your question, but if you click on the search button at the top of this page you'll be able to input some keywords. You'll most likely get your answer.
Posting Guru
Joined: Sep 2002
Posts: 1,897
Likes: 0
From: Northeastern Pa - USA
I am not sure if the system you found is from a factory system or an aftermarket system. For the most part, the systems are the same for the 6.9 and the 7.3. To verify that info ... call MALCOLM aka spectramatic There should be a pedastal that turbo mounts to . the pedastal is mounted to the engine thru the rear of the valley pan and o rings, mounting bolts etc is needed so make sure you got all that stuff. also an adapter for the exhaust to divert the driver side manifold to the pass side to drive the turbo. You probably want to make sure that all the parts from the top of the engine to the exhaust pipe are in the deal.
