Timing a 4.9L
Post Fiend
Joined: May 2004
Posts: 11,289
Likes: 6
From: Lakewood, Ohio
near brake master cylinder, it is grey, i think, and it is a connector that doesn't go anywhere with this plastic cover stuck in.
remove this, time engine, than replace.
get yourself a manual, it will be the best thing you could get for your truck.
remove this, time engine, than replace.
get yourself a manual, it will be the best thing you could get for your truck.
Posting Guru
Joined: Jun 1999
Posts: 1,083
Likes: 1
Yup...pull the spout connector out, don't lose it, and check/set the timing. Afterwards, kill the mill and put the spout connector back in. If you forget the spout connector the truck will run, but not as well.
