frame?
Thread Starter
|
Senior User
Joined: Mar 2005
Posts: 135
Likes: 0
From: indiana
frame?
im putting 4wd on my 2wd f150 and i was mounting everything up and my axle hits the cross member. im taking hte cross member out today but what should i replace it with. im going to box the frame in at the front while i have engine out with channel steel any help??
Postmaster
Joined: Apr 2003
Posts: 3,587
Likes: 0
From: Virginia Beach
By boxing the front end your already mocking the 4x4 frame anyways. get some large square thick wall tubing or the section from an old 4x4 to finish it off as a stock reproduction.
My F250 build up gallery https://www.ford-trucks.com/user_gal...&albumid=16732
Many pics of the front crossmember. F150 is similar.
My F250 build up gallery https://www.ford-trucks.com/user_gal...&albumid=16732
Many pics of the front crossmember. F150 is similar.
