L&L Clutch problem
Thread Starter
|
Senior User
Joined: Jan 2005
Posts: 259
Likes: 0
L&L Clutch problem
I recently built and put a 460 into my 81 F-150. I bought several things from L&L such as motor mounts remote oil filter and clutch and flywheel. I switched my truck to hydraulic clutch years ago, now I am having lots of problems with the clutch. The hydraulic system is free of air and works perfect but my truck is still hard to shift and when it gets warm it doesn't go into gear. I machined a 1/2 inch extension for the slave cylinder and now it goes into gear but not as smoothly as it should. The tranny has been in my truck for a couple years NP435 and never gave me problems until now. Just wondering if anyone hasd had this problem with there L&L clutch. Really would like to put a LUK clutch back in my truck
