Floor Pans
Thread Starter
|
Freshman User
Joined: Nov 2000
Posts: 32
Likes: 0
Floor Pans
I have a 69 f100 and need floor pans. I noticed in dennis carpenters mag. that the floor pans are 33"long by 23" wide. I measured my pans and they are about 25-26" from the bottom of the hump to the rockerpanel. JcWhitney says there's are 37" by 27". Anyone know of the quality difference between carpenters and jc and does carpenters fit the full width. Thanks for any help!
Wade H.
Wade H.
Fleet Owner
Joined: Jun 1999
Posts: 24,552
Likes: 74
From: Creedmoor, North Carolina
Floor Pans
Wade it is my opinion that Dennis Carpenter make the higest quality product to original Ford specks. It is rare to find someone that finds fault with their parts.
John
jowilker
[link:www.ford-trucks.net/users/jowilker|Club FTE since 01 01] My FTE Page
[link:www.ford-trucks.net/users/jowilker/NCFTE.html|NC Truck Owners] NC Ford Truck owners group
66F100s Rule
In the cool still quiet of night you can hear chevies rusting away.
John
jowilker
[link:www.ford-trucks.net/users/jowilker|Club FTE since 01 01] My FTE Page
[link:www.ford-trucks.net/users/jowilker/NCFTE.html|NC Truck Owners] NC Ford Truck owners group
66F100s Rule
In the cool still quiet of night you can hear chevies rusting away.
