Front Dana60 axle decoding
Thread Starter
|
Senior User
Joined: Feb 2001
Posts: 122
Likes: 1
Front Dana60 axle decoding
[font size="1" color="#FF0000"]LAST EDITED ON 09-Oct-01 AT 08:17 AM (EST)[/font][p]Well, I bought a '79 F250 with Dana60 frontend. It is definitely a d60. I checked the door tag after getting it home, the Axle code is 379. I absolutely can't find any resource that corresponds with this number. Anybody know where I can find this code? I want to see if it's an original axle. It was very late when I got it home, I wasn't able to clean it up to check some casting numbers on the axle but will do this ASAP.
Junior User
Joined: Mar 2001
Posts: 89
Likes: 0
Front Dana60 axle decoding
Check on the front side of long tube. This is the bill of materials #. It should read 610023-4. The first set of #s says its a 60, The second set is 3.54s or 4.10s open or limited slip. Hope this helps.PTO DAVE.
-------------------------------------
1972 Ford F-250 4x4 Dana 60/14 Bolt
4.88's, detroits, 40" Hawgs, rear PTO
winch, 390 c.i., N.P. 435, Dana 24
---------------------------------------
-------------------------------------
1972 Ford F-250 4x4 Dana 60/14 Bolt
4.88's, detroits, 40" Hawgs, rear PTO
winch, 390 c.i., N.P. 435, Dana 24
---------------------------------------
