Hi FROM AUSTRALIA
Thread Starter
|
Freshman User
Joined: Dec 2005
Posts: 37
Likes: 0
Hi FROM AUSTRALIA
Hi guys,just signed up and wanted to say hi
i'm in Perth Australia,and am currently building a'51.It was af7/f8 not exactly sure,but not only did it have big wheel openings they were also 7"wider.
I've cut the chassis down to F1 specs and changed susp to independent,also running a5.0l inj windsor and AOD
Will start gallery when i work it out.
i'm in Perth Australia,and am currently building a'51.It was af7/f8 not exactly sure,but not only did it have big wheel openings they were also 7"wider.
I've cut the chassis down to F1 specs and changed susp to independent,also running a5.0l inj windsor and AOD
Will start gallery when i work it out.
FTE Leadership Emeritus
Joined: Jan 2003
Posts: 161,999
Likes: 75
From: 3rd Rock
...Welcome to Ford Truck Enthusiasts!
If you get a minute check out the link here, it will help you to navigate around and understand this site.
https://www.ford-trucks.com/forums/s...88#post3272088
We are happy you have chosen the best source for Fords!
Enjoy FTE and The State Chapters are located at the bottom of the main forum page.
JOIN CLUB FTE -SUPPORT THE FORUMS!
See you on the boards.
….
If you get a minute check out the link here, it will help you to navigate around and understand this site.
https://www.ford-trucks.com/forums/s...88#post3272088
We are happy you have chosen the best source for Fords!
Enjoy FTE and The State Chapters are located at the bottom of the main forum page.
JOIN CLUB FTE -SUPPORT THE FORUMS!
See you on the boards.
….
FTE Leadership Emeritus
Joined: May 2004
Posts: 18,787
Likes: 30
From: Melbourne, Aus
G'day to another Aussie.
You should come down and introduce yourself in the International chapter - we have quite a few Australians on here.
https://www.ford-trucks.com/forums/f...play.php?f=141
Fred (BigF350)
You should come down and introduce yourself in the International chapter - we have quite a few Australians on here.
https://www.ford-trucks.com/forums/f...play.php?f=141
Fred (BigF350)
Thread
Thread Starter
Forum
Replies
Last Post
