swap or not
Thread Starter
|
New User
Joined: Jan 2006
Posts: 3
Likes: 0
swap or not
I have a '91 ford f-250 with a 7.5l "460" with the independent i-beam suspention. A couple weeks ago i was playing in the snow and on my way back home one of the bearing in the front end seased up and caused the tire to break free i fixed everythign changing the steering knuckle, brake caliper, outer axle ,rotor and the spindle but now my problem is that the 4wd wont engade the parts are all out of a '78 ford 3/4 ton i used the automatic locking hub out of my truck so im not sure if that may be my problem or if its something else i was also corious if it would be easier just to swap out the axle for a soild axle and if so a recommondation
FTE Leadership Emeritus
Joined: Jan 2003
Posts: 161,999
Likes: 75
From: 3rd Rock
...Welcome to Ford Truck Enthusiasts!
We are happy you have chosen the best source for Fords!
Enjoy FTE and The State Chapters are located at the bottom of the main forum page.
JOIN CLUB FTE -SUPPORT THE FORUMS!
See you on the boards.
….
We are happy you have chosen the best source for Fords!
Enjoy FTE and The State Chapters are located at the bottom of the main forum page.
JOIN CLUB FTE -SUPPORT THE FORUMS!
See you on the boards.
….
