fuse holder ?
Thread Starter
|
Senior User
Joined: Apr 2005
Posts: 142
Likes: 0
fuse holder ?
I am looking for an aftermarket fuse holder that will accept about 6 fuses for auxilary devices. I found one a the local auto parts store, but it was not covered. I would like to have something with a plastic cover, etc. to heep dire out. What do you guys suggest? Thanks.
Lead Driver
Joined: Sep 2003
Posts: 5,844
Likes: 6
From: Albuquerque
I recommend Painless fuse blocks. Good product...have been using them for years.
http://www.painlessperformance.com/webcatalog.asp
Click on fuse blocks on the left hand side of the page.
Good luck...
biz
http://www.painlessperformance.com/webcatalog.asp
Click on fuse blocks on the left hand side of the page.
Good luck...
biz
Thread Starter
|
Senior User
Joined: Apr 2005
Posts: 142
Likes: 0
Thanks for the information. The Painless site has plenty of neat stuff. I ended up installing a Buss fuse block inside a plastic 4"X4" electrical waterproof conduit box. It is working OK, but not as nice as the Painless. Thanks again, John
