Multi-switch problem
Thread Starter
|
Senior User
Joined: Jul 2004
Posts: 244
Likes: 0
From: Fort Nelson B.C.
Multi-switch problem
My 95 Bronco multiswitch is giving me grief. The signal parts work fine but anything that has to do with the wipers is not working properly. The washer spray was the first to go now the intermittant wiper option... is not an option.
I have a spare one for my 97 f-350. They look the same, do you guys think it will work if I change it out. I am on a tight schedule this week and don't want to tear everything apart if it won't work. We are in for a good chinook and snow storm so I want my wife to be looked after while I'm on the road.
I have a spare one for my 97 f-350. They look the same, do you guys think it will work if I change it out. I am on a tight schedule this week and don't want to tear everything apart if it won't work. We are in for a good chinook and snow storm so I want my wife to be looked after while I'm on the road.
Elder User
Joined: Feb 2005
Posts: 693
Likes: 0
From: Hoboken, NJ...
This may or may not work for you, but a few months ago my MF switch was giving me the same sort of static you just described. I took some electric contact cleaner and gave it a good spray out in the gap between the stalk and wiper/washer **** on the end of it.....do this while working the switch. Mine is back to 100%.
It could be that dome crap got in there......?
It could be that dome crap got in there......?
