blower
Thread Starter
|
New User
Joined: Dec 2005
Posts: 6
Likes: 0
blower
Hello everyone, new member here. I have a 83 f100 that i pulled out a 300 6 cyl and dropped in a 302 slightly over stock. I was wondering if anyone had any suggestions on a good blower to put on it. It has been punched out 30 over with a 268 comp cam and i used sealed power pistons and rings. The heads are older ford heads with the big plugs and aftermarket springs. I found one in the summit catalog for 2,199.95. I almost forgot to mention that i am running a 600 holly carb. I LOVE MY FORD TRUCK, thanks in advance for the help.
Post Fiend
Joined: Jan 2004
Posts: 6,610
Likes: 2
From: Northwest, Arkansas
Welcome to Ford Truck Enthusiasts. In order to make it easier to navigate please read the following: Forum Guidelines
Inside certain forum's there could be a Read First: thread or threads attached to the top.
Please read these threads before posting.
In Addition to the Tech Forums there are State/Province Chapters that bring local members together for meets, events and just plain fun.
Once again...Welcome to the FTE Family
Inside certain forum's there could be a Read First: thread or threads attached to the top.
Please read these threads before posting.
In Addition to the Tech Forums there are State/Province Chapters that bring local members together for meets, events and just plain fun.
Once again...Welcome to the FTE Family
