Need a little help here!!
Thread Starter
|
Elder User
Joined: Mar 2004
Posts: 620
Likes: 0
Need a little help here!!
Hey guys, im looking for a platic push in connector for a low pressure air line. The size is 5/32 and i havent found anyone local that sells them that small. If anyone knows of a place i can buy some please let me know ASAP. Even a website some place close would be helpful!! I just need a straight Union in that size!! Thanks
Jeff
Jeff
Post Fiend
Joined: Jan 2004
Posts: 6,610
Likes: 2
From: Northwest, Arkansas
What exactly do you mean Jeff. I take it the hose size is 5/32 but are you looking for a splice or a screw in connector or what. We have some for that small of hose but unsure the right fitting you need.
Thread Starter
|
Elder User
Joined: Mar 2004
Posts: 620
Likes: 0
I need a Union connector just like the ones on the Rancho shocks. Not a T but just a straight connector. Only me and you have them shocks Rollie, so you will know what im talkin about once you look at them!!
Hotshot
Joined: Mar 2001
Posts: 13,555
Likes: 79
From: Manhattan, KS
Did you try the auto parts stores or a full service hardware store like Ace or Truevalue? I think that is where I got the connectors for some vacuum line in the Tbird after the rats gnawed one in two. Can't remember the size, but I got a double ended barb connector. Is that what you are looking for?
Thread Starter
|
Elder User
Joined: Mar 2004
Posts: 620
Likes: 0
Kenworth had one but i think 7 bucks for a connector is expensive. The auto parts stores around here didnt have anything that small, so i found a store in Wichita that sells them and am callin to place a order tomorrow. Thanks guys!!
