installing power steering pump question
Thread Starter
|
New User
Joined: Dec 2005
Posts: 1
Likes: 0
installing power steering pump question
I HAVE A 1995 F150 FORD Is there a TRICK USING A PULLER TO GET THE DANG POWER STEERING PUMP OFF? WHAT A HORRIBLE DESIGN JUST TO GET TWO LOUSY BOLTS OUT FOR THE PUMP....I APPRECIATE A RESPONSE...THANKS RS
Elder User
Joined: Jan 2005
Posts: 507
Likes: 0
From: Alpharetta
it is a special steering pump pully puller. you can rent them from a couple different auto parts sto.res. i've been told if you use a regular pully puller it'll bend the pully. i agree the set up is a little difficult. not too bad onceyou get the pully off. hope this helps, others will chime in shortly i'm sure.
Keith
Keith
FTE Leadership Emeritus
Joined: Jan 2003
Posts: 161,999
Likes: 75
From: 3rd Rock
Originally Posted by ricksweet
I HAVE A 1995 F150 FORD Is there a TRICK USING A PULLER TO GET THE DANG POWER STEERING PUMP OFF? WHAT A HORRIBLE DESIGN JUST TO GET TWO LOUSY BOLTS OUT FOR THE PUMP....I APPRECIATE A RESPONSE...THANKS RS
We are happy you have chosen the best source for Fords!
Enjoy FTE....and
JOIN CLUB FTE -SUPPORT THE FORUMS!
…..See you on the boards.
Posting Guru
Joined: Mar 2003
Posts: 1,311
Likes: 0
From: Quispamsis, N.B, Canada
KJG26 is right. I did mine and if you take your time and figure out the tool it may/may not give you a hard time. I cracked my pulley all to crap and had to buy a new one. But its a battle just like anything. Hope you get it.
