Fog light installation
Thread Starter
|
Senior User
Joined: Apr 2005
Posts: 142
Likes: 0
Fog light installation
I just bought the Ford fog light accessory kit for me 2005 f250. There were no instructions in the box. There was a web site to get the instructions, but you need a ford dealer ID to gain access. Anybody done this before and willing to point me to some directions or tell me how to install? Do I have to remove the ront bumper to install the fog lights? How is the wiring routed? Any help is appreciated. BTW the kit part number is 5C3Z-15200-AC and includes a new headlight switch assembly to operate the fog lights. John
Senior User
Joined: Oct 2004
Posts: 204
Likes: 1
From: New Smryna Beach FL
I put them in my 99 and it was pretty easy. You do not have to take the bumper off. It's easier to take the light off the harness. Put both through the hole in the bumper and put them back together, As for the wiring. I bought a wiring kit at the Auto Zone for $4. On the back of the package it tells you what wires to put together for ground and which to hot wire and to a switch. If you don't need the kit go by and draw a diagram off the package....
Good luck with it...
Good luck with it...
