Almost Complete :-d

Reply Subscribe

Thread Tools

Search this Thread

Dec 6, 2005 | 11:49 PM

69429

Thread Starter

New User

Joined: Nov 2003

Posts: 4

Likes: 0

Almost Complete :-d

My 77 f-250 4x4 Supercab SB is almost complete! I used a 78 Bronco as a donor for the drivetrain and suspension. Fabbed a new crossmember under the 460 added a 6" skyjacker lift for better clearance. It is looking great, not that hard about 30 hours so far started 2 weeks ago, that is with a hoist dont try without!!!
My question is the front driveshaft binding at the yoke, should a guy just put a cv joint on it to solve that?

Dec 7, 2005 | 12:38 AM

pokerpuller

Senior User

Joined: Oct 2005

Posts: 161

Likes: 0

any chance you feel like posting pics of your fabbed crossmember? im doin the same thing and it would be a great help.
-kit

Dec 7, 2005 | 01:37 AM

ivanribic

Post Fiend

Joined: Jul 2003

Posts: 11,945

Likes: 3

From: Spokane, WA

Quote:

Originally Posted by 69429

My question is the front driveshaft binding at the yoke, should a guy just put a cv joint on it to solve that?

Yes, you'll want a CV at the t-case. If you buy a replacement front shaft (or get a junkyard shaft) from a 78/78 F250 4x4 they should have the CV. I'm not sure about the F150's. Side note, a different size CV was used between 78 and 79 so you may want to take your t-case yoke into the parts shop with you to confirm the size, or at least get measurements. The u-joints in a 78 are smaller than in a 79 and they are not interchangable.

Reply Subscribe

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump