When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
[updated:LAST EDITED ON 10-Feb-02 AT 09:20 AM (EST)]Hello Ford Enthusiasts:
I have A 1975 ford F-150 xlt and a 1977 ford F-250,My question is, If I wish to put my F-150 body onto the 77 frame will the holes line up on the body the same,Any feedback greatly appreciated in advance
Thanks Dan:-staun
From what I have heard the frames should be the same. They didn't change the mounting area intell 78 79. The best thing to do is get a friend to come over and brake out the tape measure to be sure.
Dan the sheetmetal and the chassis are the same on the F150 & F250, difference is below the chassis. The bed bolt holes may or may not line up exactly, but should be close.
http://www.clubfte.com/users/jowilker/USFlag.gif
John
jowilker email me
[link:www.ford-trucks.com/users/jowilker|My Club FTE Page] Member since 01 01
[link:www.ford-trucks.net/users/jowilker/NCFTE.html|NCFTO] North Carolina Ford Truck Owners Group
In the cool still quiet of night, you can hear chevies rusting away.
BE SURE TO MEASURE!! i had a 75 F250, and the frame was narrower than my cousin's 77 F250 by about 2 inches
chuck
79 f150 4x2
75 F250 4x4 highboy
67 f 100 4x2
71 f100 4x2
89 F250 4x4
92 Bronco 4x4