clutch problems
Thread Starter
|
Senior User
Joined: Mar 2004
Posts: 290
Likes: 0
From: alberton pei
clutch problems
I 0wn a 94.5 F450 superduty 7.3 powerstroke and i have hard shifting problems.Iwas told to put a new clutch bushing in the clutch rod under the dash so i did but i noticed the rod and pin are worn and the plastic bushing i installed only lasted about 2 months.I found what they call the perfect fix on ebay has any one used this product and if so does it work,please reply. 
Senior User
Joined: Jan 2005
Posts: 255
Likes: 0
I've seen that part that Barebackjake posted and it looks awesome to me. I had to replace that bushing last summer and ended up drilling a hole and using a cotter pin. Would have picked up the part BBJ mentioned had I known about it. For instructions on how to fix it the cotter pin way, go to Steve Baz's page here: http://pages.prodigy.net/stevebaz/_i...az/index3.html
Scroll down to the section about clutches and it's right there. Good luck
Scroll down to the section about clutches and it's right there. Good luck
