351 engine swap
Thread Starter
|
New User
Joined: Nov 2005
Posts: 7
Likes: 0
351 engine swap
This is my first post here. I have restored my 85 bronco with a c6 tranny hooked to a 351W and am wanting to change out to a '94 351W roller block. My question is whether this block has the same transmision bolt pattern and starter pattern as the older 351W's. I am going to use my same c6 tranny. And does it's crank still rotate in the same direction as the older 351W's.
Thanks for any help on this.
Thanks for any help on this.
Hotshot
Joined: May 2004
Posts: 12,170
Likes: 5
From: The hills of No. Calif.
Yes on all counts. These engines all use the same bolt pattern for the bellhousing and the same motor mount pattern. The only engines that had reverse rotation were some Marine applications.
